Thermo Scientific Revco Plasma Freezer (-30 C) 29.2 Cu. Ft. UFP3030A

The UFP3030A Plasma Upright Freezer from Thermo Scientific Revco comes with a 29.2 cu. ft. capacity. Its preset temperature is at -30 degree C and it has an automatic condensate removal and defrost, with sensor that automatically initiates defrost cycle on demand, eliminating the need for a defrost timer, minimizing frost buildup and optimizing coil efficiency. The positive airflow system and microprocessor control adds up to the functionality and performance of the unit. Its cold-rolled steel cabinet surface is finished with high-impact powder paint coating for durability.

Thermo Scientific Revco Plasma Freezer UFP3030A Features:

• Preset temperature at -30 C
• Automatic condensate removal and defrost, with sensor that automatically initiates defrost cycle on demand, eliminating need for a defrost timer, minimizing frost buildup and optimizing coil efficiency
• Positive airflow systems
• Microprocessor Control
  Simplifies operation, delivers greater accuracy
  Icon-based controls and displays
  Preset temperature setpoint
  Graphic thermometer is steady green when temperature is normal; flashes top bar for overtemperature, bulb for undertemperature
  Large, easy-to-read digital display shows temperature within 1 C
  Audible/visual warnings for overtemperature, undertemperature or power failure
  Key-operated OFF/ON/ALARM ON master switch for setpoint security
  Pushbutton alarm test
  Remote alarm contacts
  Alarm silence, ringback and auto reset
  Controller battery backup system
• Construction
  Cold-rolled steel cabinet surfaces finished with high-impact powder paint coating
  One solid door, hinged on right
  Full-length door handles
  Adjustable leveling feet
  High-density, CFC-free urethane foam insulation protects cabinet interior from ambient temperature fluctuations, minimizes operating costs
  Positive, forced-air circulation maintains uniformity at all shelf levels
  Directional airflow assures quick recovery after door openings
  Heavy-duty, hermetically sealed compressor
  CFC-free refrigerant
  Includes a 6 in. (15.2cm) 7-day circular chart temperature recorder and extra-long probe for manual alarm testing.
• Compliance
  Meets UL, CUL, and CE requirements; TUV criteria; AABB, ANRC, and FDA guidelines
• Setpoint Security: Key-operated triple position switch for main power and alarm; locks in temperature and alarm setpoints to minimize setpoint error and prevent tampering
• Power Failure Icon: Illuminated when main power is interrupted
• Service Required: Illuminated when controller is in programming mode, or if simulated warm or cold conditions fail to occur during alarm test function
• Touchpad Data Entry: Increases or decreases setpoint values in programming mode
• Audible Alarm: Audible and visual indicators are activated in the event of warm, cold or power loss conditions. Mute will silence audible alarm with 6 minute ring back interval; display remains flashing
• Touchpad Scan: Changes main display; also used to access various programming and service functions (alarm mute, recall 6 minutes)
• Alarm Test: Pressing "up" and "scan" buttons creates simulated overtemperature and undertemperature condition and activates audible and visual alarms; display flashes momentarily when test is complete
• Battery Backup: Continuous charge provides full alarm function in case of power failure. Low Battery Alarm Illuminated when the alarm system battery backup charge is low
• Digital Display: Resolution to within 0.1 C, indicates cabinet temperature during normal operation, flashes during alarm condition or setpoint adjustment, displays other values with touchpad sequence
• Door Ajar: Illuminated when door is left open and alarm is in "active" mode.
• Graphic Thermometer: Easy to view, shows normal, high or low temperature condition; steady green for normal, flashing top bar for overtemperature, flashing bulb for undertemperature

Thermo Scientific Revco Plasma Freezer UFP3030A Resources: