Thermo Scientific Revco Plasma Freezer (-30 C) 51.1 Cu. Ft. UFP5030D

You can be least bothered with your lab space and storage needs with this 51.1 cu. ft. capacity Plasma Upright Freezer from Thermo Scientific Revco. The UFP5030D model's preset temperature is at -30 degrees C and its defrost system is automatic with a sensor that automatically initiates defrost cycle on demand so you don't need a defrost timer which minimizes frost buildup and optimizes coil efficiency. The unit's positive airflow system and the advanced microprocessor control ensures simple operation yet greater accuracy.

Thermo Scientific Revco Plasma Freezer UFP5030D Features:

• Preset temperature at -30 C
• Automatic condensate removal and defrost, with sensor that automatically initiates defrost cycle on demand, eliminating need for a defrost timer, minimizing frost buildup and optimizing coil efficiency
• Positive airflow systems
• Microprocessor Control
  Simplifies operation, delivers greater accuracy
  Icon-based controls and displays
  Preset temperature setpoint
  Graphic thermometer is steady green when temperature is normal; flashes top bar for overtemperature, bulb for undertemperature
  Large, easy-to-read digital display shows temperature within 1 C
  Audible/visual warnings for overtemperature, undertemperature or power failure
  Key-operated OFF/ON/ALARM ON master switch for setpoint security
  Pushbutton alarm test
  Remote alarm contacts
  Alarm silence, ringback and auto reset
  Controller battery backup system
• Construction
  Cold-rolled steel cabinet surfaces finished with high-impact powder paint coating
  Two solid doors with keyed lock, self-close against closed-cell peripheral gasket
  Full-length door handles
  Adjustable leveling feet
  High-density, CFC-free urethane foam insulation protects cabinet interior from ambient temperature fluctuations, minimizes operating costs
  Positive, forced-air circulation maintains uniformity at all shelf levels
  Directional airflow assures quick recovery after door openings
  Heavy-duty, hermetically sealed compressor
  CFC-free refrigerant
  Includes a 6 in. (15.2cm) 7-day circular chart temperature recorder and extra-long probe for manual alarm testing.
• Compliance
  Meets UL, CUL, and CE requirements; TUV criteria; AABB, ANRC, and FDA guidelines
• Setpoint Security: Key-operated triple position switch for main power and alarm; locks in temperature and alarm setpoints to minimize setpoint error and prevent tampering
• Power Failure Icon: Illuminated when main power is interrupted
• Service Required: Illuminated when controller is in programming mode, or if simulated warm or cold conditions fail to occur during alarm test function
• Touchpad Data Entry: Increases or decreases setpoint values in programming mode
• Audible Alarm: Audible and visual indicators are activated in the event of warm, cold or power loss conditions. Mute will silence audible alarm with 6 minute ring back interval; display remains flashing
• Touchpad Scan: Changes main display; also used to access various programming and service functions (alarm mute, recall 6 minutes)
• Alarm Test: Pressing "up" and "scan" buttons creates simulated overtemperature and undertemperature condition and activates audible and visual alarms; display flashes momentarily when test is complete
• Battery Backup: Continuous charge provides full alarm function in case of power failure. Low Battery Alarm Illuminated when the alarm system battery backup charge is low
• Digital Display: Resolution to within 0.1 C, indicates cabinet temperature during normal operation, flashes during alarm condition or setpoint adjustment, displays other values with touchpad sequence
• Door Ajar: Illuminated when door is left open and alarm is in "active" mode.
• Graphic Thermometer: Easy to view, shows normal, high or low temperature condition; steady green for normal, flashing top bar for overtemperature, flashing bulb for undertemperature

Thermo Scientific Revco Plasma Freezer UFP5030D Resources: